If Your Hot Water System Breaks: Prompt Response
If Your Hot Water System Breaks: Prompt Response
Blog Article
The author is making a number of good pointers related to What Would Cause My Electric Water Heater to Stop Working? as a whole in this post directly below.
Many modern-day homes use an electric hot water heater for their heating system, as a result of its ease as well as simplicity of use. Nevertheless, just like any other electrical home appliances, issues might occur with its use, suddenly. It can be actually frustrating to wake up to a cool shower as opposed to a warm one or having your bathroom with water that isn't warm enough or even also hot. Whatever the situation might be, hot water heater problems can be fairly stressful. The good news is, we have actually made a checklist of possible solutions to your water heater concerns. There are a variety of factors that can cause many of these issues, maybe a problem with the power supply, the electric heating element, or the thermostat. Prior to doing anything, guarantee you switch off the main power supply for safety. Whatever the issue is, getting it taken care of must not posture too much of an issue if you follow these steps:
Check Your Power Supply:
As basic as this may seem, it is very necessary. Without adequate power, your water heater will certainly not work. So the first thing to do when your water unexpectedly stops working is to confirm that it isn't a power problem. Check if the fuse is burnt out or the circuit breaker stumbled. If the circuit breaker is the problem, merely transform it off and on once again. Replace any kind of busted or worn-out fuse. Test the device with power after these modifications to see if it's currently functioning.
Inspect the Burner in the Hot Water Heater:
If it's not a power problem, then try checking out your burner if it is still functioning. Test each of your burner to make sure the trouble isn't with any one of them. If any one of them is defective, replace that component and after that check whether the warm water is back on.
Examine Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm enough, you might require to check the temperature setups on your top thermostat. Make certain the circuit breaker is switched off prior to doing anything. Open the accessibility panel and also press the red switch for temperature reset above the thermostat. This should assist warm the water. Transform the breaker back on as well as inspect if the problem has actually been settled.
Call A Professional:
If after changing all defective components and also resetting your temperature level, the hot water heater still isn't working, you might need to get in touch with a professional plumber for a professional opinion. The problem with your heating unit could be that the cold and hot taps have actually been switched over or it may be undersized for the amount of warm water required in your home. Whatever the situation might be, a specialist plumber would certainly help resolve the issue.
Verdict
Hot water heater problems are not always major. A number of them result from small concerns like a blown fuse or damaged burner. Changing the malfunctioning components must work. Nevertheless, if you are still unable to solve the issue, give a call to your nearby plumber ahead to get it taken care of.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I ran across that entry on How to Troubleshoot and Repair an Electric Water Heater while scouting around the search engines. You should take a moment to distribute this blog if you liked it. Many thanks for going through it.
Book Maintenance Report this page